The grid supplies alternating current (AC), but an electric car’s battery stores direct current (DC). The only real difference between AC and DC charging is where the electricity is converted: inside the car for AC, inside the charger for DC. At home you will use AC, because a home chargepoint is a dedicated AC unit. DC is the fast option you use on the road. If you live in Dorset, Hampshire or Devon and are thinking about a home charger, the choice is not AC against DC. It is a properly installed Mode 3 AC chargepoint against a plug-in lead you would rather not rely on, and that is the choice we help homeowners and businesses make every day.

Smarthometechnical
Make Home EV Charging Practical
Smarthometechnical installs EV chargers for homes and businesses across Dorset, Hampshire and Devon, including dedicated home chargepoints.

Visit

TL;DR

Table of Contents

Why the battery needs DC and the grid supplies AC

Every socket in your house delivers AC. Your car’s battery cannot store AC, so something has to convert it. BEAMA’s guide to electric vehicle infrastructure explains the two routes plainly. With AC charging, the vehicle’s onboard charger does the conversion. With DC charging, the chargepoint does it and sends DC straight to the battery.

That explains almost everything else you read about the two types:

So “AC or DC” is not a quality ranking. It is a question of where the heavy electronics sit, and that depends on where you are charging.

AC vs DC at a glance

AC charging DC charging
Where conversion happens In the car (onboard charger) In the chargepoint
Typical home or public use Homes, workplaces, destination car parks Public rapid and ultra-rapid sites
Typical power 3.7 kW to 7.4 kW at home From 24 kW to hundreds of kW
Best for Overnight and long-stay charging Quick top-ups on journeys
Installation Practical for a driveway or garage Large, specialist equipment

The power figures come from BEAMA, which gives typical residential Mode 3 AC as 7.4 kW, with some 3.7 kW installations, and DC (Mode 4) from 24 kW up to hundreds of kW. Actual speed depends on your car, the chargepoint, the cable and the state of the battery.

How long does each take in real life?

The numbers that matter at home are simple. A 60 kWh car takes just under 8 hours to charge from empty to full on a 7 kW home charger, adding roughly 25 to 30 miles of range an hour. Very few people charge from empty. If you drive 30 to 40 miles a day, you are replacing that in a little over an hour of charging, and the car does the rest while you sleep.

DC charging is quicker because the power is higher, but the speed is not constant. Cars slow charging as the battery fills, so the last part takes longest. This is why drivers on a long trip tend to rapid-charge up to around 80% and carry on, rather than waiting for 100%.

A worked example for a household in, say, Poole or Winchester: you come home at 6 pm with the battery at 40% on a 60 kWh car. A 7 kW chargepoint puts in about 36 kWh in roughly five hours, which takes the car to full before midnight. You would never need DC for that routine.

Mode 2 vs Mode 3: a different question

People often mix up AC and DC with Mode 2 and Mode 3. They describe different things. AC and DC describe the type of current and where conversion happens. The modes describe the charging arrangement, as set out in the same BEAMA guide.

Mode 2: the portable cable

Mode 2 is AC charging from a non-specialist socket, using a cable with control and protection built into it. You may know it as a granny charger or occasional-use cable. BEAMA says residential Mode 2 charging is often limited by vehicle protocols to 1.4 to 2.3 kW (6 to 10 A), and gives a general residential limit of 3 kW (13 A). Compare that with the 7 kW from a dedicated unit and you see why it is slow: a three-pin plug works at about 2.3 kW and can take up to around 18 hours to fill many batteries.

Home charging power comparison for Mode 2 and Mode 3

Mode 3: the dedicated chargepoint

Mode 3 is AC charging from a purpose-built EV chargepoint on its own circuit. The control, communication and protection functions are built into the chargepoint itself. This is what a home wallbox is. It is faster, it is designed for hours of continuous load, and it is the arrangement safety bodies point to for regular charging.

Where DC fits

DC charging is Mode 4 in this system. It is the public rapid charger. It is not something a typical home supply is set up for, so for a house in Dorset, Hampshire or Devon, the decision is between Mode 2 and Mode 3, both of which are AC.

Why a socket is not a long-term answer

A kettle runs for a few minutes. A car draws a heavy load for hours. Electrical Safety First advises against relying on ordinary domestic sockets for EV charging because the sustained load and long duration may exceed what standard sockets and wiring are designed for. It says the safest home method is a dedicated EV chargepoint, fitted by a registered, competent electrician trained and qualified for EV chargepoint installation. Where a socket is used, EV-rated 13 A sockets are marked BS1363/EV and should be on dedicated circuits.

The Electrical Safety Roundtable’s September 2025 guidance says a granny charger is for occasional or emergency use, not as the main charging solution. If you do use one, it recommends plugging it straight into a dedicated wall socket, with no extension lead or adaptor, and avoiding a circuit already carrying other heavy loads.

Older properties, which are common across the Dorset coast, Hampshire villages and Devon market towns, are where this matters most. Wiring age, the condition of the consumer unit and the length of the cable run to the driveway all decide what is safe. That is a job for an electrician to assess on site, and an electrical test of the existing installation is a sensible part of the visit.

Why a socket is not a long-term answer

What your car and charger need to agree on

Before you choose equipment, check four things on your car:

  1. The AC charging rate it accepts. Look in the handbook for the onboard charger’s maximum. A 7.4 kW chargepoint will not charge a car with a 3.7 kW onboard charger any faster than 3.7 kW.
  2. The connector. AC charging in the UK uses a Type 2 socket on the car. DC rapid charging uses a separate arrangement on the car for the higher power, so check what your model has if you plan long trips.
  3. Your home supply. A single-phase home supply makes 7 kW the practical home ceiling. Higher AC rates generally need a three-phase supply.
  4. Your usage. Count the miles you drive in a typical week, then work out how many hours of overnight charging that needs.

The usual result is that a 7 kW untethered or tethered Mode 3 unit suits nearly every household. We size the charger to the car and the supply during the survey.

Smart charging rules for new home chargepoints

Home chargepoints sold in Great Britain have to meet smart-charging rules. GOV.UK says the Electric Vehicles (Smart Charge Points) Regulations 2021 apply to relevant private domestic and workplace chargepoints sold in Great Britain, including smart cables. They exclude Northern Ireland sales and public chargepoints. The regulations came into force on 30 June 2022, with the cybersecurity requirements taking effect on 30 December 2022.

The reasoning is practical. The Department for Transport’s regulatory report for July 2023 to December 2024 explains that moving demand to lower-demand or high-renewable periods can reduce pressure for network reinforcement and may lower consumers’ bills. For you, that means a modern AC chargepoint can be set to charge when electricity is cheapest, which is where the home AC route really earns its keep. If you also have solar panels or a battery, the same chargepoint can be part of a wider setup. Our guide to pairing an EV charger with solar panels in Hampshire shows how that works, and our piece on off-peak battery charging covers the timing side.

If several chargers or a large electrical load share one supply, load management stops them overloading it. We cover that in EV charger load balancing.

Which should you choose?

Use this as a quick guide:

Promo: a home or business chargepoint in Dorset, Hampshire and Devon

We install EV chargers for homes and businesses across Dorset, Hampshire and Devon. Smart Home Technical Ltd holds MCS and NICEIC accreditation and a 4.9 Trustpilot rating, and we advise on the right chargepoint for your car and your supply. If you are ready to move from a plug-in cable to a proper chargepoint, see our EV charger installation service.

Smarthometechnical

Once a charger is in, it needs looking after like any other electrical equipment. Our guide to EV charger maintenance explains what to check and how often.

Our view

Most of the questions we get about AC and DC come from drivers who have read that DC is “faster” and assume they need it at home. They do not. DC is brilliant on a motorway journey. On your driveway, the sensible thing is a dedicated AC chargepoint that suits your car, your supply and your tariff.

The part people underestimate is the installation. A chargepoint runs for hours at a time, so the circuit, the earthing arrangements and the condition of your consumer unit all matter more than the headline kilowatts. We would rather survey the property and size the unit properly than hand over a box and leave.

If you already have solar panels or are thinking about a battery, plan the charger at the same time. Charging from your own generation or from cheap overnight power is where an EV starts to pay back, and it is far easier to design that in once than retrofit it later. That is why we install solar, batteries and EV chargers together.

Simon

FAQ

Is home EV charging AC or DC?

Home charging is AC. A home chargepoint supplies AC from your mains, and the car’s onboard charger converts it to DC for the battery. The typical residential rating is 7.4 kW, with some 3.7 kW installations, according to BEAMA.

Can I fit a DC charger at home?

DC chargepoints are designed for public and commercial sites and deliver from 24 kW up to hundreds of kW. A normal home supply is set up for AC, and a 7 kW AC unit already charges most cars overnight. If you are running a business with higher demands, we can discuss what your site needs.

Is Mode 3 better than Mode 2?

For regular charging, yes. Mode 3 is a dedicated chargepoint on its own circuit with control and protection built in. Mode 2 is a cable with protection that plugs into an ordinary socket, and it is limited to lower power. Safety bodies advise Mode 3 for everyday use and a Mode 2 cable only for occasional or emergency charging.

Do Teslas use AC or DC?

All electric cars store DC in the battery and accept AC at home through the onboard charger, and DC on rapid public chargers. At home, a Tesla charges from an AC chargepoint just like any other EV. Check the maximum AC rate in your handbook to size the charger.

Does AC or DC charging harm the battery?

Both are designed for use on your car. For daily use, a home AC chargepoint is the gentle, convenient routine, and you can keep rapid DC for journeys. Your car’s handbook gives the manufacturer’s charging guidance.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *