Smart home prewiring means running the cables for your network, cameras, lighting control, door entry and audio while walls, ceilings and floors are still open, then connecting the devices later. Done at first fix (the stage when cables are pulled before plastering), it costs a fraction of chasing cables through finished rooms. If you are building, extending or rewiring in Dorset, Hampshire or Devon, the cable is the one part of a smart home you cannot easily add afterwards. The gadgets can change every few years. The wiring behind the plaster should not have to.
This guide sets out what to run, where it goes, which UK rules now affect the layout, what it costs, and how to coordinate it with your builder so nothing is missed.
TL;DR
- Prewire at first fix: retrofitting smart wiring is estimated to add roughly 30 to 50% over new-build or rewire wiring.
- Spend the cable budget on a Cat6 network first: data points in every room where a screen, camera or access point might go, all returning to one cupboard.
- New wiring rules that took effect on 15 April 2026 affect where combined power and data cabling can sit, so the cable plan needs an electrician’s input before walls close.
- Typical UK ranges for 2026: £500 to £1,200 for basic smart wiring, up to £3,000 to £5,000+ for a whole-house job.
- Choose the control layer (Home Assistant, SmartThings or similar) after the cabling is planned. Good cabling suits all of them.
Table of Contents
- What prewiring involves and when to do it
- Which cables to run
- The network is the foundation
- Where the equipment goes
- The 2026 wiring rules and what they change
- Coordinating with your builder and electrician
- What smart home prewiring costs in the UK
- Home Assistant or SmartThings?
- Our view on prewiring
- Talk to us about your project
- FAQ
- Sources
What prewiring involves and when to do it
Prewiring is a design job before it is an installation job. You decide which rooms need data points, where cameras and wireless access points will sit, where the heating controls and lighting circuits go, and where everything comes back to. Then the cables are pulled in one pass at first fix, before plasterboard goes up or before a rewire is closed up.
The moments that suit it best:
- New build or self-build. Walls are open and cable routes are free.
- Extension or loft conversion. The new space is open even if the rest of the house is not.
- Full or partial rewire. Floorboards are up and plaster is being made good anyway. Our guide to what a house rewire really costs in the UK shows how much of a rewire is labour, which is why adding data cable at the same visit makes sense.
- Major refurbishment. Any time you are stripping back to brick or studwork.
The reason timing matters is labour. A current UK cost guide puts the main cost of smart wiring in routing cables and making good, not the devices. Open walls remove most of that labour.
Which cables to run
You do not need ten kinds of cable. The professional body for home technology installers, CEDIA, lists the core cabling types in a smart home wiring guide. In plain terms:
| Cable | What it is for | Where it earns its place |
|---|---|---|
| Cat6 or Cat6A Ethernet | Network, power over Ethernet (PoE) and control | Every room, plus ceilings for access points and cameras |
| Fibre optic | Very high bandwidth, future-proofing | Backbone runs in larger homes or outbuildings |
| HDMI and AV cable | Video to a TV or projector | Media rooms and cinema rooms |
| Low-voltage control cable | Sensors, keypads, wall controls | Where wired control is wanted |
| Speaker cable | Distributed audio | Rooms with ceiling or wall speakers, which CEDIA describes as more reliable than wireless speakers |
PoE simply means one network cable carries both data and the small amount of power a device needs, so a camera or access point needs no nearby socket. CEDIA advises checking each device’s PoE requirement (PoE, PoE+ or PoE++), calculating the switch’s total power budget, and using Cat6A in rooms with high power loads such as media rooms.
The network is the foundation
If you only prewire one thing, make it the network. Wi-Fi alone struggles in homes with many smart devices, 4K streaming, home offices and cameras, and a UK installation guide notes that a properly installed Cat6 network gives up to 1Gbps over 100 metres as permanent infrastructure.
A sensible layout for a typical three or four bedroom house:
- One central point. All Cat6 runs return to a patch panel (a rack of sockets where every cable ends), usually a 24-port panel in a utility cupboard or under the stairs, connected to a network switch.
- Ceiling access points. One PoE Wi-Fi access point per floor is typical for a three to four bedroom house, and each needs only a Cat6 cable because PoE powers it.
- Data points where you might use them. TV positions, desks, the kitchen, the garage, a garden room. A spare point costs pennies in cable while walls are open.
- Camera positions. Outside doors, driveway, side access. Plan the cable to each before the external finish goes on.
- Broadband entry. Decide where the line enters the house and make sure it can reach the central cupboard.
If you are a developer or self-builder in England, there is a baseline too: government guidance says new dwellings need gigabit-ready physical infrastructure and, subject to a £2,000-per-dwelling cost cap, a gigabit-capable connection. A good internal cable plan lets you make the most of that connection in every room.
Where the equipment goes
The central cupboard needs thought. CEDIA says centralised low-voltage equipment reduces overheating risk and suits energy monitoring and servicing, and that racks need appropriate ventilation when power consumption is high. Choose a cupboard that is dry, reachable, ventilated and close to a dedicated power supply. Leave room for a bigger switch than you need today.
A few practical rules we would apply on any job:
- Put back boxes deeper than standard wherever a wall panel or keypad might go.
- Leave a cable route between floors, such as a vertical conduit, so you can add cable later without opening walls.
- Label both ends of every run and keep a drawing of the routes. You will be glad of it in five years.
- Run outdoor cable in suitable duct, and think about garages, sheds and garden rooms now.
The 2026 wiring rules and what they change
Smart home wiring combines mains power with data, and the rules have moved recently. Homebuilding reported that new UK wiring rules took effect on 15 April 2026. They affect where systems combining power and data, such as smart home wiring and PoE, can run in walls, ceilings and service voids, with the aim of reducing risk from heat and interference. Existing systems need not be moved, but new installations should follow the updated placement expectations. The same report says homeowners will notice it most in the extra planning around ventilation, access and layout, and that some retrofit smart systems may need more careful planning around existing electrical layouts.
In practice: do not leave cable routes to chance, and do not let data cable follow the same bundle as mains cable just because it is convenient. Agree routes with the electrician before first fix.

Other rules that touch smart wiring
The current edition of the wiring regulations is BS 7671:2018+A4:2026. Points that matter for smart homes, as summarised in a UK smart home wiring guide:
- Every AC final circuit supplying lights in a home needs additional protection from an RCD (a device that cuts the power quickly when it detects a fault) of no more than 30 mA. That covers every smart lighting circuit, and any existing lighting circuit modified to take smart switches.
- Adding new circuits, such as one for a cabling rack or new lighting circuits for smart zones, is notifiable under Part P of the Building Regulations in England and Wales. A registered electrician can self-certify the work under a competent person scheme.
- Like-for-like switch replacement may not be notifiable, but adding neutral wires or modifying circuits is.
- A certificate cannot be issued without the BS 7671 tests: protective conductor continuity, insulation resistance and protective device checks.
From 15 October 2026, a separate summary notes that new model forms for EICRs and installation certificates are in use, with domestic EICRs checking luminaire RCD protection and AFDD installation. For a build, that means the electrician issues a proper certificate for the work, which matters when you sell. If you are in rented property or let one, our landlord EICR guide covers the inspection side.
This is why smart wiring is work for a registered electrician. In Dorset, Hampshire and Devon we are MCS and NICEIC accredited, and we handle the testing and certification as part of the job.
Coordinating with your builder and electrician
Most prewiring failures are coordination failures, not technical ones. The cable was in the plan but not on the site, or the plasterboard went up a day early. Here is a routine that works:
- Decide the smart features before the first-fix drawings are final. Lighting control, heating zones, cameras, door entry, audio, an EV charger, solar and battery. Each affects cable routes and the cupboard.
- Bring the electrician in at design stage. They can place data cable and mains cable so they meet the current placement expectations.
- Put the cable schedule in writing. List each room, each run, each back box depth and the termination point.
- Agree who does what. Who pulls the cable, who terminates it, who tests it, who certifies the mains side.
- Walk the site before boarding. Check every run is labelled and every back box is in. Photograph the walls before they close.
- Test and document at completion. Cable test results and a labelled drawing go in your home file.
Budgeting time for this stage is rarely wasted. A guide on pre-construction planning budgets makes the general point that decisions made before building starts are cheaper than changes made once work is under way, and wiring is a clear example.
While you are planning, think about energy. If solar, a battery or an EV charger are on the list, the cable and consumer unit space should allow for them. See our examples of whole home energy systems, and for the charger itself our EV charging safety guide.
What smart home prewiring costs in the UK
Costs vary with house size, the number of rooms and how much making good is needed. A 2026 UK cost guide gives these ranges for smart home wiring:
| Level | What it covers | Typical range |
|---|---|---|
| Basic | Smart switches in main rooms of a 3-bed house | £500 to £1,200 |
| Mid-range retrofit | Smart sockets, hub, Cat6 to key rooms | £1,500 to £3,000 |
| Comprehensive | Whole-house system | £3,000 to £5,000+ |
The same guide itemises structured cabling. Cat6 cable runs at £0.30 to £0.50 per metre, a 24-port patch panel at £30 to £60, and ceiling PoE access points at £80 to £150 each plus the cable run. A typical three-bedroom structured cabling job (8 to 12 Cat6 runs, patch panel, PoE switch and three access points) is quoted at £400 to £700 in materials and £1,500 to £3,000 installed.
The cable itself is cheap. The cost is the labour of getting it there, which is the strongest argument for doing it at first fix. These are published guide figures, not quotes: the real price depends on your property, so get a written quote based on your plans. Our home automation page is the place to start.
Home Assistant or SmartThings?
Whichever you choose, the cabling stays the same. The control layer is the software and hub that ties devices together, and a wired network with PoE and good Wi-Fi suits both.
A 2026 UK guide from SmartHomeUK gives the broad picture. SmartThings hubs cost about £69 to £129, with very good Matter and Zigbee support and a starter mixed-brand setup of around £280 to £700. Home Assistant Green is about £95 to £130, with a realistic first-year spend of around £260 to £900. It describes Home Assistant as the most customisable, local-first option with the lowest lock-in, and also the most complex, needing you to learn integrations, automations, backups and updates.

A 2026 comparison from Hometechtested adds that Home Assistant is free software with an optional cloud subscription for remote access, takes around 3 to 5 hours to set up, and keeps data on hardware you own. SmartThings sets up in about 30 minutes, with no monthly fee for ordinary use, and routes device data through Samsung’s cloud.
A simple way to choose:
- You want quick setup and mainstream devices: SmartThings suits that.
- You want local control, privacy and deep customisation: Home Assistant suits that, with a longer setup.
- You want it configured and working: have the installer set up and commission the system on a properly cabled network.
Our view on prewiring
We are electricians first, and that shapes how we see smart homes. A smart home is a set of electrical systems that have to be safe, tested and certified before they are clever.
The question we hear most is which hub or app to buy. We would start somewhere else: where do the cables go? Apps and hubs get replaced. A Cat6 cable behind plaster, a deep back box and a ventilated cupboard keep working for decades.
The regulations are tightening around mixing power and data, so we think the sensible route is to plan the cabling with a registered electrician who can also test, certify and connect the mains side. We work across Dorset, Hampshire and Devon, and combining home automation with solar, battery storage and EV charging under one contractor means the consumer unit, the cable routes and the control system are designed together.
If you are about to close up walls, talk to us first.
Simon
Talk to us about your project
We are Smart Home Technical Ltd, electrical contractors in Dorset, Hampshire and Devon covering home automation, solar panel installation, battery storage, EV chargers, CCTV and home security, fire alarms and electrical testing. We hold MCS and NICEIC accreditation, and our Trustpilot rating is 4.9. If you want cabling planned alongside automation, send us your drawings through our home automation page.

For solar, batteries or EV charging in the same project, see our main site for the full list of services.
FAQ
Is smart home cabling worth it if I use Wi-Fi devices?
Yes. Wi-Fi works best when access points are fed by a wired network, because PoE access points need only a Cat6 cable. Cables also carry cameras and control systems reliably, and the cable is the part you cannot add cheaply later.
What is the difference between prewiring and a smart home wiring plan?
The wiring plan is the drawing: rooms, data points, camera positions, back box depths, the cupboard and the routes. Prewiring is installing the cable to that plan at first fix. Make the plan first, then have your electrician review it against the current wiring regulations.
How much does home automation cost in the UK?
A 2026 UK guide gives about £500 to £1,200 for basic wiring, £1,500 to £3,000 for mid-range retrofit and £3,000 to £5,000+ for whole-house. Devices, hubs and programming are extra. Ask for a written quote based on your drawings.
Can I add smart wiring after the house is finished?
Yes, but it is more work. Retrofitting is estimated to add roughly 30 to 50% to the cost compared with wiring during a build or rewire, because cables must be routed through finished walls and made good. Wireless systems are possible, but a wired backbone is still the better foundation.
Does smart lighting need an RCD?
Yes. Under BS 7671, every AC final circuit supplying lights in a home needs 30 mA RCD protection, including circuits modified to fit smart switches, according to a UK wiring cost guide. A registered electrician will test and certify the work.
Sources
- Smart Home Installation & Wiring Cost UK 2026
- BS 7671 A4:2026 model forms explained
- The Ultimate Smart Home Wiring Guide, CEDIA
- New build connectivity: information for developers, GOV.UK
- New wiring rules affect where you can install electrical systems, Homebuilding
- How to Build a Smart Home UK 2026, SmartHomeUK
- Home Assistant vs SmartThings vs Apple Home (2026), Hometechtested
- Pre-construction planning budgets